|
PHASE SEPARATION SCIENCE,
INC.
6630 Baltimore National Pike (US 40)
Baltimore, MD 21228
Click
here for directions
Samples can be dropped off
directly at our laboratory facility located at 6630 Baltimore National
Pike. Normal hours for sample receipt are Monday through Friday, 8:30
AM to 5:00 PM.
Samples can be picked up
from your office or project location on an "all day" basis
by our courier at no additional charge if scheduled in advance. The Courier Map indicates the
normal area of operation for this service. This range can be extended,
but may require an additional cost. Additional charges for excessive
cooler weight, or standby time - the samples are not ready upon
courier's arrival - may also be incurred. Please contact the laboratory
directly to discuss these services.
 No
Charge "All Day" service
 Subject
to additional cost |
Rush pickup options are also
available on a 6, 4 and 2 hour basis. Please check the
Courier Rate Sheet for
applicable charges.
Directions
to Phase Separation Science, Inc.
From the North:
Take I 95 South to the Baltimore Beltway (I 695) and go West
towards Pikesville. Follow I 695 to US 40 - Baltimore National Pike
(exit 15B) and head
West towards Ellicott City. Go through 4 traffic lights, with the 4th
being Nuwood Drive. Proceed 1/4 mile to 6630 Baltimore National Pike,
which is on the right hand side, between Russel Subaru and Russel BMW.
The laboratory is located on the ground level right side of the building.
From the Southeast:
Take I 97 or I 95 North to the Baltimore Beltway (I 695) and go North
towards Towson. Follow I 695 to US 40 - Baltimore National Pike (exit
15) and head West towards Ellicott City. Go through 4 traffic lights,
with the 4th being Nuwood Drive. Proceed 1/4 mile to 6630 Baltimore
National Pike, which is on the right hand side, between Russel Subaru
and Russel BMW. The laboratory is located on the ground level right
side of the building.
From the Southwest:
Take I 495 North towards Silver Spring. Follow I 495 to US 29 and head
North towards Columbia. Follow US 29 to US 40 - Baltimore National Pike
and head East towards Ellicott City. Stay on US 40 until you reach the
Patapsco Valley State Park. US 40 will cross over the Patapsco River.
Once you cross the river, get in the left lane, as you will make
the first left at the top of the hill. The laboratory is almost directly
in front of you as you make the left turn, at 6630 Baltimore National
Pike, between Russel Subaru and Russel BMW. The laboratory is located
on the ground level right side of the building.
From the West:
Take I 70 East towards Baltimore. Follow I 70 to US 29 and head South
towards Columbia. Follow US 29 to US 40 - Baltimore National Pike and
head East towards Ellicott City. Stay on US 40 until you reach the Patapsco
Valley State Park. US 40 will cross over the Patapsco River. Once you
cross the river, get in the left lane, as you will make the first
left at the top of the hill. The laboratory is almost directly in front
of you as you make the left turn at 6630 Baltimore National Pike,
between Russel Subaru and Russel BMW. The laboratory is located on
the ground level right side of the building.
Click map below for
interactive directions!
|
